the Best Zapper is ParaZapper MY

This site is being updated, Please use Hulda Clark ParaZapper

Please order your Hulda Clark ParaZapper from http://huldaclarkparazapper.com

Preliminary

Eliminator™ IV Frequency Generator and Zapper
Rife Frequency Generator Specifications

The The Eliminator™ IV Frequency Generator is a microprocessor based, square wave frequency generator zapper designed with digitally adjustable offset. This frequency generator includes the ability to program any single Rife frequency at a time in one package at an affordable cost. The output is strong ( up to 10 volts, user controlled in steps of 0.1 volt ) and this unit is intended for those uses that need a stronger output as well as more numerous and more accurate frequencies. The unit is specified to be within +/- 0.149 Hz for all frequencies. The Eliminator IV is assembled in China. It also includes an external power supply. It is also much safer than other units that plug directly into the AC mains because the power supply is IEC60601 rated. While the frequencies contained in this zapper may be very specific to certain organisms, it should also be effective as a general purpose zapper at any frequency according to Dr. Clark's statements. The frequencies are 1 Hz to 9999 Hz with a resolution of 1.0 Hz. The unit also has a positive offset adjustment from 0.1 volts to full scale voltage of 10.0 volts.

The The Eliminator™ IV-B Frequency Generator is also a microprocessor based, frequency generator with sine wave, triangle wave, sawtooth, and square wave outputs, designed with digitally adjustable offset. This frequency generator includes the ability to program any single Rife frequency at a time in one package at an affordable cost. The output is strong ( up to 10 volts, user controlled in steps of 0.1 volt ) and this unit is intended for those uses that need a stronger output as well as more numerous and more accurate frequencies. The unit is specified to be within +/- 0.149 Hz for all frequencies. The Eliminator IV is assembled in China. It also includes an external power supply. It is also much safer than other units that plug directly into the AC mains because the power supply is IEC60601 rated. While the frequencies contained in this zapper may be very specific to certain organisms, it should also be effective as a general purpose zapper at any frequency according to Dr. Clark's statements. The frequencies are 1 Hz to 9,999 Hz with a resolution of 1.0 Hz. The unit also has a positive offset adjustment from 0.1 volts to full scale voltage of 10.0 volts.

These units do come with a 30 day money back guarantee and the manufacturer provides a 5 year parts and labor warranty.



ParaZapper Customer comments

Like us on Facebook
Visit us at ParaZapper Facebook page

Power to the unit is supplied by a wall power unit and is controlled by a push-on / push-off switch. The output voltage is limited to 10 volts.





Getting Started

The ELIMINATOR IV is a high quality versatile function generator capable of producing continuous signal, frequency sweeping signal, and user defined arbitrary signals. It was designed as an easy-to-use tool. The operation of ELIMINATOR IV is extremely straightforward. The following examples will lead you step-by-step through some typical uses.

Data Entry

Setting of ELIMINATOR IV signal parameters is done by first pressing one of the parameter keys (F/T, AMP, or OFS). The display of that parameter will be cleared and an underline is shown, indicating place for new value to be typed in. If at the moment you hit a parameter key the cursor is not currently at that parameter just press the key one more time to make the underline shown. Then enter new value using the DIGIT keys. Complete entry by hitting one of the UNITS keys. If an error is made at typing pressing [ESC] key will do backspace to correct it. If no more digits left when [ESC] is pressed it will exit Data Entry and display the original value.

Setting of ELIMINATOR IV-B signal parameters is done by first pressing one of the parameter keys (WaveForm, F/T, AMP, or OFS). The display of that parameter will be cleared and an underline is shown, indicating place for new value to be typed in. If at the moment you hit a parameter key the cursor is not currently at that parameter just press the key one more time to make the underline shown. Then enter new value using the DIGIT keys. Complete entry by hitting one of the UNITS keys. If an error is made at typing pressing [ESC] key will do backspace to correct it. If no more digits left when [ESC] is pressed it will exit Data Entry and display the original value.

A cursor focused parameter can also be adjusted incrementally by tuning [ADJ] dial.

Examples

1 ) To set output frequency to 5KHz press the following keys: [F/T] [5] [KHz]

2 ) The output waveform is locked to square wave in the Eliminator™ IV, but with the Eliminator™ IV-B, you can select the available waveforms..

3 ) To set output amplitude to 3V peak-to-peak press the following keys: [AMP] [3] [V]

4 ) To set DC offset to -2.5V press the following keys: [OFS] [+/-] [2] [.] [5] [V]

1 ) Power Switch : The power switch turns the ELIMINATOR IV on and off.

2 ) Parameter Keys : The parameter keys select the parameter to be entered. If cursor is not currently at a parameter pressing the parameter key will first move cursor to that parameter

3 ) Digit Keys : The numeric keypad allows for direct entry of the ELIMINATOR IV parameters. To change a parameter value simply press the parameter key (if cursor is not currently at the parameter press the parameter key twice) and then type a new value. Entries are terminated by the UNITS keys. If an error is made at typing press [ESC] key to correct it (back space). If no more digits left when [ESC] is pressed it will exit Data Entry and display the previous value.

The [+/-] key may be pressed at any time during numeric entry.

. 4 ) Unit Keys : The UNIT keys are used to terminate numeric entries. Note that the unit keys represent different unit at different parameter entry.

Under CW mode pressing unit keys without first entering digits will display incremental step sizes. [Hz] key displays frequency step size. [KHz] key displays time step size. 5 ) Waveform Key : This function has been locked in the square wave positive off set mode.

6 ) ESC key : This key backspace typed digits and/or exit current state.

7 )ADJ Dial By [ADJ] dial users can incrementally adjust a focused parameter up and down. To do this first pressing a parameter key to move cursor the parameter to be changed and then turn the dial.

? 8) Mode key: This key selects ELIMINATOR’s working modes.

9) Frequency (period)

10) Wave form Display of current output frequency or period.

11) DC Offset Display of current output DC offset.

12) Amplitude Display of current output amplitude. state

13) Cursor


By purchasing any zapper or accessory from this site
you are agreeing that these products are sold
"not intended for use on humans or animals".

Not sold for use with drinking water, potable water,
in swimming pools, or for food preparation.


Eliminator™IV

Limited quantities available

For the experienced or advanced user who wants more frequencies and power.
With Stronger output than standard zappers, Low Battery Indicator, and a multicolor Status Indicator.

Price with paddles will be $850.00 U.S. plus S&H

One Eliminator™ IV, with copper paddles and wrist straps for $850.00 (list $850.00) US plus S+H.
Please allow 2 to 3 weeks for delivery in the U.S.

This frequency generator / zapper
comes with copper paddles and wrist straps.
One Eliminator™ IV, with copper paddles, wrist straps, and pads for $890.00 (list $850.00) US plus S+H.
Please allow 2 to 3 weeks for delivery in the U.S.

This frequency generator / zapper
comes with copper paddles, wrist straps, and pads.

Eliminator™IV-b

Limited quantities available

For the experienced or advanced user who wants more frequencies and power and the ability to select multiple waveforms.
With Stronger output than standard zappers, Low Battery Indicator, and a multicolor Status Indicator.

Price with paddles will be $1050.00 U.S. plus S&H

One Eliminator™ IV, with copper paddles and wrist straps for $1100.00 (list $1100.00) US plus S+H.
Please allow 2 to 3 weeks for delivery in the U.S.

This frequency generator / zapper
comes with copper paddles and wrist straps.
One Eliminator™ IV, with copper paddles, wrist straps, and pads for $1150.00 (list $1150.00) US plus S+H.
Please allow 2 to 3 weeks for delivery in the U.S.

This frequency generator / zapper
comes with copper paddles, wrist straps, and pads.

A Message from AmTech

Thank you for your interest in The Eliminator IV. Hulda Clark, the original inventor of the Zapper, was both a doctor and inventor. Her testing and research led to this great discovery. She should have been nominated and given a Nobel Prize. Maybe in time the world will appreciate her work. Dr. Clark was a true humanitarian, only had public interest at heart. Instead of filling patents she placed the design in public domain. That means any one can use it free. With every design there is room for improvement. So we made many improvements. So many ask how does it do this, "kill virus and bacteria as well as the microbes in the body?" Scientist have known for many years that all cells work with small amounts of electrical current at low voltages. Every organ even the brain. All of these generate a field that can be measured with sensitive electronic devices. Healthy body tissues generate their own frequency at below 10 thousand hertz. All sick cells that are infected by some cancer or other bad things in the body generate at a different frequency. Much higher than healthy cells. So what was needed was a way to short circuit these sick cells and kill them. This is done by generating a frequency that the sick cells resonate at. This short circuits the sick cells and kill them. It was originally intended for the purpose of improving health by neutralizing parasites and pathogenic organisms in the human body with a microamp current applied at the skin surface.

Many companies world wide have sought to capitalize on Doctor Clark’s discovery. Manufacturing the Zapper under a lot of different names. We know that set up, design, marketing, tooling all cost a lot of money. Every manufacture would like to recover this cost and make a profit. We at AmTech are no different. When we decided to get into this area we first looked at all the other Zappers on the market. After carefully reading Doctor Clark’s book we came up with a new idea. We felt that many buyers were serious about using this or other products to help with their health situation. Many companies claim many things about their product, is there any way to know for sure? According to Doctor Clark, certain frequencies at low voltage and milliamps were necessary to achieve the desired results. Unless you own a lot of expensive electronic equipment you are left at the mercy of the seller. The Eliminator solves this problem for you. There is a built in monitoring system that monitors frequency, milliamps and voltage. Doctor Clark also recommenced certain exposure times with rest in between. We have included a timer that allows you to set the on time and the off time. We do believe as Doctor Clark said that no AC Voltage should ever be allowed to be used when the Zapper was on for treatment. We solved this problem with our charger circuit. When in the charge position the Eliminator can not be used. There is a low voltage warning, a led light flashes yellow as a caution measure. When the battery is below the useful out put the led changes to flashing red. Every manufacture wants to sell you his product. All make different claims as to why you should spend your money buying their product. I believe that all of them have their merits and do work. Even Doctor Clark said just a 9 volt battery pulsed could help. After a careful review of all the Zappers on the market we contacted the owner of ParaZapper. With in a short while I was convinced of his sincerity and desire to really help people not just make a profit. We decided to make a joint effort in this direction. The Eliminator is the result of this joint effort.



Warranty
Satisfaction
Privacy
About

us
Shipping Technical

information
Other zapper products

Hulda Clark Zapper is
not FDA approved for human or animal use.

Due to FDA restrictions,
Hulda Clark Zappers are not sold or intended for
human use or on animals.

Not sold for use on humans or animals due to FDA requirements.

Usage

Using these devices for eliminating parasites from water is easy but is not 100 percent effective.
Before and after microscopic examination of pond water samples show significant reduction of microbial content after usage.

Normal application is to place the electrodes into the water, further apart is better.
The unit is then turned on 7 minutes and off for 20 minutes and repeated 3 or 4 times.

Do not use for drinking water, potable water, or in swimming pools.


Contact Sales: sales@paradevices.com

Our normal phone hours are 9:30 AM to 3:00 PM Central time weekdays
however, if you need to reach us at other times, call anyway.
We do not take orders by phone and can not make recommendations for use with humans or animals.
If we are not in, leave a name and phone number, we will call back.

Phone# 1-866-765-5116 Nationwide Tollfree
--or-- 205-856-3909 Alabama Local
Both numbers are for the same phone line.



ParaZapper is a trademark of
Para Systems, Inc.
5537 Balboa Ct.
Lower Entrance
Pinson, AL 35126 USA
All rights reserved.

Notice: On advice of counsel, we are required to inform you that the statements and claims on this web site have not been evaluated by the Food and Drug Administration and are not intended to diagnose, treat, cure or prevent any disease -- not for use on humans or with pets. These battery powered devices are not offered or intended for human use or to diagnose or prescribe for medical or psychological conditions nor to claim to prevent, treat, mitigate or cure such conditions, nor to recommend specific products as treatment of disease or to provide diagnosis, care, treatment or rehabilitation of individuals, or apply medical, mental health or human development principles. The devices discussed herein have not undergone evaluation and/or testing by the United States Food and Drug Administration or like agency of any other country. Risks that might be determined by such testing are unknown. The information on this site is not a substitute for medical or veterinary advice.





Historical references
Parasite Zapper at parazapper.com
zapper at paradevices.com
Hulda Clark Zapper at hulda-clark-parasite-zapper.com

visits to this page

parazapper site visits